By 
Black Screen!
Black Screen, your iPhone ‘on,’ but the screen is dark. Your iPhone rings, but you can not answer the call. It is a widespread problem for iPhone, and you also face the same problem with your iPhone 8 or 8 Plus. In this article, we have talked about the most straightforward methods to fix if iPhone 8 is stuck on a blank screen.
A hardware problem with your iPhone usually causes a black screen, so there is usually no quick fix. That said, a canned software crash causes your iPhone screen to freeze and go black, so let’s try a hard reset to see if that’s what’s happening.
There are mainly two kinds of reasons why your iPhone screen is black and won’t turn on. First of all, your iPhone might have a black screen of death due to a hardware issue. For example, your phone’s screen is cracked or damaged after the device is dropped or damaged by water.
Also, the iPhone black screen of death could cause by a software problem, and for example, a software crash can freeze your iPhone screen and cause it to go black.
If the black screen of death on your iPhone results from hardware damage, you should take the phone to the Apple Store.
Fix iOS System on iPhone Using iOS System Recovery
If your iPhone black screen cannot be solved with basic solutions, you’re suggested to try Joyoshare UltFix iOS System Recovery. This tool is mighty enough to fix 150+ software issues on a variety of iOS devices, including black screen, stuck on white Apple logo, boot loop, stuck in DFU/Recovery mode, iPhone won’t turn on, blue screen, red screen, and more. What makes it an optimal solution here is its lossless repair process, helping get your device back to normal without data loss. Best of all, you can apply it to any model of iPhone, iPad, and iPod touch. This professional software can support the latest iOS version without hassle.
Step 1: Run Joyoshare UltFix on your computer, connect iPhone using an original USB, and click “Start”. Make sure that you have pre-installed iTunes on the computer.
Step 2: Now choose a repair mode, like “Standard Mode”, and click on “Next” to put your iPhone into DFU/Recovery mode.
Step 3: Confirm your iPhone device info as well as the iOS version you need. Then click on “Download” to download the firmware package. After downloading, simply verify it.
Step 4: Click on the “Repair” button in this program to start fixing iPhone black screen.
Fix, iPhone 8 stuck on black or white screen.
Resume strength
But since your device is not responding to input commands from the touchscreen given its current state, you will have to perform the alternative restart method called a force restart. It is still a soft reset, but using the hardware keys. There will be no data affected in the process, so you need to worry about data loss. It is how you do it:
Press and fast release the Volume Up button. Press and fast release the Sound Volume-Down button. Press & hold the Side/Power button until the Apple symbol appears.
Forced reboot while charging
Sometimes, a device refuses to turn on when it runs out of power due to errors affecting your iPhone’s charging and power system. So what happens is that this error prevents your device from carrying out its usual operations to charge and reboot. One possible solution you can try, in this case, is a force restart while your device connects to the charger. Make sure your device has already built up enough battery charge to turn it on. Then follow the steps above to restart your iPhone 8 while connected to the power source. See if that works. If not, try the next applicable solution.
Reset all settings to resolve BLACK Screen
Touch the Settings Symbol on your iPhone home screen. Tap General. Then scroll down and touch on Reset. Select Reset all settings from the options. It clears the system settings and restores the original values or defaults without affecting the internal data. If prompted, enter your device passcode to continue. Then tap Reset all settings again to confirm.
Your iPhone should automatically restart when the Reset is complete. After the reboot, configure the individual options and enable the main functions, including Wi-Fi networks, to use them again on your device.
Restore your iPhone in iTunes through recovery mode or Black screen
It is an advanced type of iOS restore that you can do when dealing with more complex system errors that caused the device to malfunction. In this place, you will need to put your iPhone into recovery mode first. Then restore iOS in iTunes.
Press and fast release the Volume-Up button. Press and fast release the Volume-Down button. Press and hold the Side / Power button when you see the Connect to iTunes screen. Do not release the controls while you see the Apple logo, as you will need to enter recovery mode. On the next screen, you should find the Restore or Update option. Select Update first to update iOS. Otherwise, select the Restore option.
Wait for iTunes to try to reinstall iOS without removing your data. iTunes then downloads the software for your mobile. If the download takes more than 20 minutes, your iPhone exits the Connect to iTunes screen. If this happens, please wait until the download is ended and then go back to the previous steps to enter recovery mode again.
Restore your iPhone in iTunes through DFU mode
It considers being the most in-depth type of system restore that you can do on your iPhone. Allows your device to connect with iTunes on a personal computer without loading the operating system or bootloader.
Here’s how to work a DFU mode restore on your iPhone 8:
Close any running programs on your personal computer. Connect your iPhone to the computer using the Apple-supplied USB cord. At the same time, try to connect your mobile. Press and hold the Power button for about 3 seconds. Press and hold the Side/button, press and hold the Volume Down button for about 10 seconds. If the Apple logo appears, it means that you have pressed the buttons for too long and will have to start over. If you don’t see any logo, release the Side / Power button and press and hold the Volume Down button for another 5 seconds. If the screen remains black afterward, it means you have successfully entered DFU mode. At this point, An alert message will appear on your computer stating that iTunes has detected your iPhone. If you see that message, follow the instructions on the screen to complete the DFU mode recovery process. If you see the ‘Connect to iTunes’ page on the screen, it means you haven’t entered DFU mode, and you’ll need to start over.
If none of that works, it is most likely a hardware problem.
Get an iPhone screen repair service.
If your iPhone screen turns black after replacing the screen or after the phone has been dropped/damaged by water, the black screen of death is probably caused by hardware damage, especially when the iPhone screen is black but the phone is still on.
If you don’t fix iPhone black screen with the above methods or the iPhone screen turned off, but the phone still works, you need to get an iPhone screen repair service from a local store. If the iPhone is still under warranty or the AppleCare plan, take the phone to your local Apple store for help.
Conclusion on Black Screen
That was it. It was the simplest way to fix if iPhone 8 was stuck on a blank or black screen. Have a problem with your iPhone 8 Series? Then there is nothing to worry about anything. We have a blog dedicated to iPhone 8 issues and guides. Here is the iPhone 8 Troubleshooting Guide. Although rare, some cases of problems on Apple devices may have faulty hardware. As origin. If a factory reset doesn’t help fix your issue, visit your local Apple Store or Service Center so a qualified technician can examine the hardware. If necessary, they can send it in for repair or replacement.
Do you have an iPhone 8 or an Apple device and need these kinds of simple tutorials? Then keep an eye out for the Tech Meets Tech iPhone tips and tricks column because Tech Meets Tech will offer many tutorials for Poco soon.
If you have any queries about it, the comment section is always available for you.
Comments